How-to Round Dome or Oval Camper light shade installation instructions

Unpacking Instructions

When you receive your lamp shades, two shades will be packed together. To separate them, please do the following:

Round Lamp shades: twist evenly as you pull to separate.
Oval Lamp shades: gently hold the base of each shade and carefully pull from the base to avoid pulling them apart unevenly.

unpacking-ezgif.com-optimize

Installation Instructions

Round dome LED lights (3.5” & 4.5”)

1. Twist off the light diffuser cap

2. Twist on lamp Shade to install.

3. Twist on the light diffuser cap

Oval 9×3.8″ light

Tools needed:

Small flathead screwdriver
Philips screwdriver

1. Pop off the diffuser cover of your interior RV light fixture, revealing the screws underneath.

Repeat for the other side

Place your flathead at the ends.

2. Unscrew the light fixture from the ceiling; do not disconnect any wiring!

3. Slip the shade over the light fixture. With the lip of the shade against the ceiling, reinstall the light cover using the original screws and holes.

4. Snap the cover back over the light fixture.The larger side goes in first, opposite of how it was removed.

Installed!